Australian made height adjustable couches, tables and chairs for healthcare applications

ABCO 3 Section Traction Couch

The ABCO Traction Couch is designed and manufactured in Australia with a 5 year warranty[*]


The three ergonomically sized sections allow for more flexibility in use as the upholstery sections match the major portions of the human anatomy. There is a breathe hole with plug in the head / short section.

The traction unit mount has universal fittings for the major traction units, is height adjustable to improve angle of pull as required and can be swung to either side to improve access.

The long section slides with the patient and can be locked at any point.

The retractable wheel system makes moving the couch easy without compromising stability in use.

Product Code: TA30.06011.EM00MF.10W10

Standard Specifications

 

ABCO Health Care has a policy of continuous improvement. Specifications and prices are subject to change without notice
Couch Dimensions Head section 340mm long
  Centre section 560mm long
  Long section 1020mm long
  Overall length 2000mm - 2600mm including Traction Mount
  Width 600mm
Upholstery Angle adjustment Head & Long sections Manual [rods through plates]
Upholstery Fabric Vinyl – Medical grade heavy duty vinyl fabric. Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils. Light fast, fire retardant, sanitised and stain resistant.
  Foam 38mm high density foam rolled over the edges of the strong plywood base providing a full working width and extended life with firm support.
  Colours Wedgewood. Other colours on request
Frame Materials Heavy steel plate and tube
  Colour Light Grey
  Wheel System Single action retractable castors for ease of movement and 'on-the-floor' stability in use. Levelling foot on one corner.
Height adjustment Range 540 - 1040mm
  Lift mechanism Two leg swing arm
  Lift operation Linak brand European electric actuator
  Control Foot control
Electrical Requirements   Medically approved to AS 3200 / EN60601 - 1
  Supply 230vAC ±10%, 50hz max 1.5amp
  Operation 24vDC max 70VA
Lifting Capacity   200kg
Weight   85kg
Shipping Dimensions   170 x 63 x 65cm / 100kg. Shrink-wrapped on a wooden pallet with bubble wrap
ARTG No   123753
Warranty   5 years, parts only

 

Select Custom Options

Options
Our standard vinyl upholstery is Studio brand medical grade heavy-duty vinyl fabric.
The exclusive formulation delivers a superior softness for comfort including excellent strength and wear characteristics.
Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils; light fast; fire retardant; sanitised; stain resistant.
Maintenance:
  • Recommended cleaning with chemically neutral soap and warm water, then wipe clean.
  • Do not dry-clean or use abrasive or solvent based products.
see product image
We can match your specific fabric on request. Depending on product there may be a surcharge
On request
  • Retractable wheels
    • Couch lifts on wheels for movement
    • On-the-floor stability in use
       
  • Braked Castors
    • More suitable for frequent movement or movement with a patient
    • Each casstor is individually braked
       
  • Base Plate without wheels
    • Removes all movement associated with braked castors
    • More suitable where there is no requirement for frequent movement
    • Easy to clean round
    • Allows patient hoist access
A foot control is preferable:
  • If you need to adjust the height or upholstery configuration of your table or chair during a procedure without using your hands.

Choose a hand control: 
  • If you don't need to make these adjustments during a procedure or can do so by hand.
  • Where you need to move your table or chair regularly
  • If the location is not suitable for a foot control [eg a wet area]

Select a double hand or foot control to control your table from either side.
Standard
Replace Footswitch with Handset
Control your table or chair from either side
All our Breathe Holes come with an upholstered plug insert
Centre section lifts to 30deg angle
Suitable for most ABCO Health Care products subject to confirmation.
  • The batteries are mounted in a pack attached to the base framework and integrate with a special control box. This control box is not interchangeable with the standard control box which must be replaced for a field upgrade.
  • 1.2ah @24vDC.
  • Based on a typical load of 30% maximum actuator rating this permits approximately 35 up/down cycles when fully charged.
  • The actuator may be used with either mains or battery power.
  • Charge fully overnight before use, using mains cable to actuator system.
  • Frequent charging will extend the battery life which, subject to the usage pattern, will be up to 4 - 5 years. Infrequent charging may reduce this by as much as 60%.

Starting at: $3,246.00+GST

From the cart you can request a formal quote or place an order.