Australian made height adjustable couches, tables and chairs for healthcare applications

ABCO T1000 Treatment Chair

Designed and manufactured in Australia for Chemotherapy, Dialysis and other similar treatments where comfort is paramount. This chair is designed for long periods of sitting.
Pre-programmed Entry/Exit and Emergency CPR positions
Tredelenberg -12°
Fully electric height, tilt, backrest and leg rest with 2 separate Nurse and Patient hand controls.
Self leveling, swing back armrests.
The seat height range is 480mm-880mm + seat tilt
The powerful twin column lift ensures no lengthwise movement during height adjustment.
250kg lifting capacity
100mm Medical castors for easy moving all with directional and total lock standard.


This chair comes with a 5 year warranty[*]

Product Code: TE1000.05581.CEEE0H0.004P0

Standard Specifications
Couch Dimensions Backrest section 890mm long
  Seat section 570mm long
  Leg section 375mm long
  Overall length 1870mm long
  Width 570mm or 670mm.  [with Arm rests total 870mm or 970mm]
Upholstery Angle adjustment Seat tilt, leg rest & backrest Electric
Upholstery Fabric Vinyl – Medical grade heavy duty vinyl fabric. Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils. Light fast, fire retardant, sanitised and stain resistant.
  Foam 100mm comfort foam on a strong plywood base providing a full working width and extended life with firm support.
  Colours Wedgewood. Other colours on request
Frame Materials Heavy steel plate and tube
  Colour Light Grey
  Wheel System 100mm Medical castors with directional and total locking
Height adjustment Range 480-880mm
  Lift mechanism Twin column
  Lift operation Genuine Linak brand European electric actuator system
  Control Foot control
Electrical Requirements   Medically approved to AS 3200 / EN60601 - 1
  Supply 230vAC ±10°, 50hz max 3.0amp
  Operation 24vDC max 70VA
Lifting Capacity   250kg
Weight   110kg
Shipping Dimensions   170 x 100 x 65cm / 110kg. Shrink-wrapped on a wooden pallet with bubble wrap
ARTG No   123754
Warranty   5 years, parts only

 

 

Select Custom Options

Options
Our standard vinyl upholstery is Studio brand medical grade heavy-duty vinyl fabric.
The exclusive formulation delivers a superior softness for comfort including excellent strength and wear characteristics.
Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils; light fast; fire retardant; sanitised; stain resistant.
Maintenance:
  • Recommended cleaning with chemically neutral soap and warm water, then wipe clean.
  • Do not dry-clean or use abrasive or solvent based products.
see product image
We can match your specific fabric on request. Depending on product there may be a surcharge
On request
Suitable for most ABCO Health Care products subject to confirmation.
  • The batteries are mounted in a pack attached to the base framework and integrate with a special control box. This control box is not interchangeable with the standard control box which must be replaced for a field upgrade.
  • 1.2ah @24vDC.
  • Based on a typical load of 30% maximum actuator rating this permits approximately 35 up/down cycles when fully charged.
  • The actuator may be used with either mains or battery power.
  • Charge fully overnight before use, using mains cable to actuator system.
  • Frequent charging will extend the battery life which, subject to the usage pattern, will be up to 4 - 5 years. Infrequent charging may reduce this by as much as 60%.

Starting at: $6,480.00+GST

From the cart you can request a formal quote or place an order.

Related Products
  • Starting at: $5,178.00+GST