Australian made height adjustable couches, tables and chairs for healthcare applications

ABCO Vojta Therapy Table

ABCO Health Care
NDIS PROVIDER 4050003869


The ABCO Vojta Table is designed and manufactured in Australia with a 5 year warranty[*]


A specialized table for Vojta Reflex therapy developed in cooperation with Australian Vojta practitioners.



•Single Section: 2000mm with breathe hole and plug
•30mm thick closed cell EVA foam with 12mm soft overlay
•Electric height adjustment [45 - 95cm] with foot control
•Single action retractable castors with 155mm clearance below frame
•Lifting capacity 200kg


 

Product Code: NEV1.10051.E0000F.10H10

Standard Specifications

 

ABCO Health Care has a policy of continuous improvement. Specifications and prices are subject to change without notice
Couch Dimensions Overall Length 2000mm
  Width 1000mm
Upholstery Fabric Vinyl – Medical grade heavy duty vinyl fabric. Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils. Light fast, fire retardant, sanitised and stain resistant.
  Foam 30mm high density closed cell EVA foam covered with 12mm of soft foam for enhanced comfort while providing a full working width and extended life.
  Colours Balmain Navy. Other colours on request
Frame Materials Heavy steel plate and tube
  Colour Light Grey
  Wheel System Single action retractable castors for ease of movement and 'on-the-floor' stability in use. Levelling foot on one corner.
Height adjustment Range 450 - 950mm
  Lift mechanism Two leg swing arm
  Lift operation Genuine Linak brand European electric actuator system
  Control Foot control
Electrical Requirements   Medically approved to AS 3200 / EN60601 - 1
  Supply 230vAC ±10%, 50hz max 1.5amp
  Operation 24vDC max 70VA
Lifting Capacity   200kg
Weight   85kg
Shipping Dimensions   203 x 103 x 60cm / 100kg.Shrink-wrapped on a wooden pallet with bubble wrap
ARTG No   123753
Warranty   5 years, parts only

 

Select Custom Options

Options
If there are any options you would like that are not listed, please contact us. As the manufacturer we are able to do a variety of custom options including non-standard lengths and widths for an extra cost. Contact us via sales@abcohc.com.au or 03 9768 3756
If there are any options you would like that are not listed, please contact us. As the manufacturer we are able to do a variety of custom options including non-standard lengths and widths for an extra cost. Contact us via sales@abcohc.com.au or 03 9768 3756
Our standard vinyl upholstery is Studio brand medical grade heavy-duty vinyl fabric.
The exclusive formulation delivers a superior softness for comfort including excellent strength and wear characteristics.
Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils; light fast; fire retardant; sanitised; stain resistant.
Maintenance:
  • Recommended cleaning with chemically neutral soap and warm water, then wipe clean.
  • Do not dry-clean or use abrasive or solvent based products.
see product image
We can match your specific fabric on request. Depending on product there may be a surcharge
On request
A foot control is preferable:
  • If you need to adjust the height or upholstery configuration of your table or chair during a procedure without using your hands.

Choose a hand control: 
  • If you don't need to make these adjustments during a procedure or can do so by hand.
  • Where you need to move your table or chair regularly
  • If the location is not suitable for a foot control [eg a wet area]

Select a double hand or foot control to control your table from either side.
Standard
Replace Footswitch with Handset
Control your table or chair from either side
A battery can be added. The absence of the power cable removes hazards. The battery can be recharged overnight
Starting at: $2,985.00+GST

From the cart you can request a formal quote or place an order.