Australian made height adjustable couches, tables and chairs for healthcare applications

ABCO Bariatric 1 Section Bobath Neurological Table

The ABCO Bariatric 1 section Bobath Neurological Table is designed and manufactured in Australia with a 5 year warranty. It is available in widths of 1200 - 1800mm and is suitable for neurological treatments including the Bobath technique


Designed to lift patients up to 500kg this table is also available with an electrically operated backrest. 

The simple concept of using four electric columns for height adjustment eliminates the 'trampoline' effect found on many conventional tables when heavy patients sit on the side of the table. This allows for wider tables – up to 1800mm wide.


  • Single section upholstery to 1200mm wide. Upholstery in two sections above 1200mm. 

With a height range of 500 - 900mm, access is simple for patients and a comfortable working height is easily set. 

125mm braked castors are standard giving clearance of 155mm below the base frame to allow patient hoist access. 

Options include:


  • ±15° Trendelenburg function allows for further positioning options.
  • Battery
  • Breathe hole[s] with plug. 

There is no Australian GST payable on Neurological Tables.

ABCO Health Care
NDIS PROVIDER 4050003869

Product Code: NB100.12021.B0000HH0.00CP0

ABCO Health Care has a policy of continuous improvement. Specifications and prices are subject to change without notice
Couch Dimensions Overall length 2000mm
  Width 1200mm
Upholstery Fabric Vinyl – Medical grade heavy duty vinyl fabric. Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils. Light fast, fire retardant, sanitised and stain resistant.
  Foam 38mm high density foam rolled over the edges of the strong plywood base covered with 12mm of soft foam for enhanced comfort while providing a full working width and extended life.
  Colours Wedgewood. Other colours on request
Frame Materials Heavy steel plate and tube
  Colour Light Grey
  Wheel System 125mm braked castors giving 150mm clearance below the frame for hoist access. Three + fully lockable and one directionally lockable
Height adjustment Range 500 - 900mm
  Lift mechanism Four columns
  Lift operation Linak brand European electric columns
  Control Hand control
Electrical Requirements   Medically approved to AS 3200 / EN60601 - 1
  Supply 230vAC ±10%, 50hz max 4.5amp
  Operation 24vDC max 70VA
Lifting Capacity   500kg
Weight   150kg
Shipping Dimensions   203 x 123 x 65m / 165kg. Shrink-wrapped on a wooden pallet with bubble wrap
ARTG No   123573
Warranty   5 years, parts only

 

 

Starting at: $6,240.00

From the cart you can calculate freight and request a formal quote or place an order.

Options
Our standard vinyl upholstery is Studio brand medical grade heavy-duty vinyl fabric.
The exclusive formulation delivers a superior softness for comfort including excellent strength and wear characteristics.
Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils; light fast; fire retardant; sanitised; stain resistant.
Maintenance:
  • Recommended cleaning with chemically neutral soap and warm water, then wipe clean.
  • Do not dry-clean or use abrasive or solvent based products.
see product image
We can match your specific fabric on request. Depending on product there may be a surcharge
On request
Choose a width that suits your requirments
A foot control is preferable:
  • If you need to adjust the height or upholstery configuration of your table or chair during a procedure without using your hands.

Choose a hand control: 
  • If you don't need to make these adjustments during a procedure or can do so by hand.
  • Where you need to move your table or chair regularly
  • If the location is not suitable for a foot control [eg a wet area]

Select a double hand or foot control to control your table from either side.
Standard
Replaces Hand Control
Please ask for options available for this product
All our Breathe Holes come with an upholstered plug insert
Suitable for most ABCO Health Care products subject to confirmation.
  • The batteries are mounted in a pack attached to the base framework and integrate with a special control box. This control box is not interchangeable with the standard control box which must be replaced for a field upgrade.
  • 1.2ah @24vDC.
  • Based on a typical load of 30% maximum actuator rating this permits approximately 35 up/down cycles when fully charged.
  • The actuator may be used with either mains or battery power.
  • Charge fully overnight before use, using mains cable to actuator system.
  • Frequent charging will extend the battery life which, subject to the usage pattern, will be up to 4 - 5 years. Infrequent charging may reduce this by as much as 60%.

If there are any options you would like that are not listed, please contact us. As the manufacturer we are able to do a variety of custom options including non-standard lengths and widths for an extra cost. Contact us via sales@abcohc.com.au or 03 9768 3756
If there are any options you would like that are not listed, please contact us. As the manufacturer we are able to do a variety of custom options including non-standard lengths and widths for an extra cost. Contact us via sales@abcohc.com.au or 03 9768 3756
Starting at: $6,240.00

From the cart you can calculate freight and request a formal quote or place an order.

We have Finance options available
Related Products
  • Starting at: $3,060.00
  • Starting at: $2,465.00
  • Starting at: $3,435.00
  • Starting at: $7,795.00