Australian made height adjustable couches, tables and chairs for healthcare applications

ABCO Dynamic [Sliding Top] Tilt Table

ABCO Health Care
NDIS PROVIDER 4050003869


ABCO Health Care's new Dynamic Tilt Table is available in a range of configurations to optimise patient care and outcomes. It is designed and manufactured in Australia with a 5 year warranty[*]based on our popular Dual Action Tilt Table available since 1997.

Therapeutic Tilt Tables are primarily used in the acute phase of rehabilitation following trauma [eg Spinal Cord Injury or Traumatic Brain Injury], in ICU's, for functional rehabilitation of handicapped or disabled patients and in cardiac assessments.

See a YouTube Video describing the ABCO Dynamic Tilt Table here

By using a twin column lift we are able to achieve a more powerful lifting function without lengthwise movement during height adjustment. As a bonus, we have been able to design a table structure which has fewer places where hands or limbs could be crushed.

It was developed to permit easy transfers to the tilt table independently, from a wheel chair, bed or with a hoist [there is 155mm clearance below the frame for hoist clearance]. Carers can adjust the working height to the best level for them [up to 970 or 770mm depending on the height range chosen] using the hand control.

The long cut-out in the leg area allows for individual strapping of the legs as required. A set of three patient straps is supplied as standard.

The table top tilts to 80deg and patients can safely walk on and off the table if appropriate taking advantage of the adjustable angle foot plate [ +/- 30deg in 5deg steps]. Two angle indicators, one on either side of the table, are also a standard accessory.

Lifting capacity is 350kg and tilting capacity is 200kg

Whether used in a Rehabilitation setting or at a patient's bedside, the Dynamic Tilt Table can improve patient recovery rates while reducing risks to carers.

This is achieved through progressive partial weight bearing exercises using the sliding top on the tilt table which can significantly strengthen deconditioned lower extremities.
Repeated exercise on the Dynamic Tilt Table allows physical progress to be assessed in an objective manner.
For patients able to exercise only one leg, a leg support [standard inclusion] can be fitted to either side of the table

Patient handling causes many injuries to health care workers and the use of a Dynamic Tilt Table overcomes the need to move patients out of bed on to the floor for weight bearing exercise critical for their recovery.

Simply transfer the patient to the table, raise the backrest slightly for comfort and resistance, remove the insert, release the lock and your patient is ready to exercise with the level of resistance controlled by the angle of the table.

The ABCO Health Care Dynamic Tilt Table is built to handle patients weighing up to 350kgs.

Moving the table to a patient's bedside reduces patient discomfort and the costs of transfers. The 125mm lockable castors make moving the table effortless.


Standard configuration includes:



  • Height range 570 - 970mm

  • Tilting capacity 200kg

  • Fast or slow tilting speed with 'soft-stops'

  • Hand control

  • Adjustable angle twin foot plate

  • Set of 3 patient straps

  • Tilt angle indicators on both sides of table

  • Single leg support

  • Battery back-up


There is no Australian GST payable on Tilt Tables.

Product Code: TY400.07021.CEE00H0.005P0

Standard Specifications
ABCO Health Care has a policy of continuous improvement. Specifications and prices are subject to change without notice
Couch Dimensions Main Section 1750mm long
  Overall Length 1950mm
  Width 710mm
Upholstery Angle adjustment Tilt Twin Electric actuators
Upholstery Fabric Vinyl – Medical grade heavy duty vinyl fabric. Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils. Light fast, fire retardant, sanitised and stain resistant.
  Foam 38mm high density foam rolled over the edges of the strong plywood base covered with 12mm of soft foam for enhanced comfort while providing a full working width and extended life.
  Colours Wedgewood. Other colours on request
Frame Materials Heavy steel plate and tube
  Colour Light Grey
  Wheel System 125mm braked castors [155mm clearance for hoists]
Height adjustment Range 590 - 990mm [optionally 520 -  770mm]
  Lift mechanism Vertical lift with no lengthwise movement
  Lift operation Twin Linak brand European electric columns
Carriage adjustment Range 350mm
  Function Twin linear bearings with four runners
  Control Hand control
Electrical Requirements   Medically approved to AS 3200 / EN60601 - 1
  Supply 230vAC °10%, 50hz max 3.0amp
  Operation 24vDC max 70VA
Battery back-up
Lifting Capacity   350kg Dynamic / 700kg Static
Tilting capacity   200kg
Weight   100kg
Shipping Dimensions   197 x 82 x 60cm / 95kg. Shrinkwrapped  on a wooden pallet
ARTG No   123753
Warranty   5 years, parts only

 

 

Select Custom Options

Options
If there are any options you would like that are not listed, please contact us. As the manufacturer we are able to do a variety of custom options including non-standard lengths and widths for an extra cost. Contact us via sales@abcohc.com.au or 03 9768 3756
If there are any options you would like that are not listed, please contact us. As the manufacturer we are able to do a variety of custom options including non-standard lengths and widths for an extra cost. Contact us via sales@abcohc.com.au or 03 9768 3756
Our standard vinyl upholstery is Studio brand medical grade heavy-duty vinyl fabric.
The exclusive formulation delivers a superior softness for comfort including excellent strength and wear characteristics.
Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils; light fast; fire retardant; sanitised; stain resistant.
Maintenance:
  • Recommended cleaning with chemically neutral soap and warm water, then wipe clean.
  • Do not dry-clean or use abrasive or solvent based products.
see product image
We can match your specific fabric on request. Depending on product there may be a surcharge
On request
The standard height range is 570 - 970mm suitable for standing transfers from beds.

The low range option is 520 - 770mm and more suitable for wheel chair transfer
Standard Option. More suitable where waist high transfers are made from beds
More suitable for wheel chair transfers
Choose the 350kg tilt function for fast tilting function [11sec] or heavier patients
Choose the 350kg tilt function for fast tilting function [11sec] or heavier patients
Starting at: $7,870.00

From the cart you can request a formal quote or place an order.

Related Products
  • Starting at: $5,425.00
  • Starting at: $3,660.00