Australian made height adjustable couches, tables and chairs for healthcare applications

ABCO G55 Gynaecology Chair

The ABCO G55 Gynaecology Chair is designed and manufactured in Australia with a 5 year warranty


The G55 is designed for bigger patients and will lift up to 300kg.

The fast electric motor quickly adjusts the height from an easily accessed 500mm up to 1050mm and the seat tilts to 20°.

Electric actuators control the seat tilt and the backrest angle

Fully adjustable foot pads enhance patient comfort.


A stainless-steel tray is located below the seat

The chair converts into an examination couch using the leg extension [included].

Product Code: GY50.06021.FEE00F.00310

Couch DimensionsBackrest section840mm long

ABCO Health Care has a policy of continuous improvement. Specifications and prices are subject to change without notice
  Seat section 460mm long
  Leg section 500mm long removable
  Overall length 1860 with extension piece
  Width 600mm [ Arm rests; total 760mm]
Upholstery Angle adjustment Seat Tilt & Backrest Electric
  Leg Rest Removable
Upholstery Fabric Vinyl – Medical grade heavy duty vinyl fabric. Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils. Light fast, fire retardant, sanitised and stain resistant.
  Foam 38mm high density foam covered with 12mm soft foam rolled over the edges of the strong plywood base providing a full working width and extended life with firm support.
  Colours Wegdewood. Other colours on request
Frame Materials Heavy steel plate and tube
  Colour Light Grey
  Wheel System 75mm lockable castors.
Height adjustment Range 500 - 1050 - 1400mm
  Lift mechanism Cantilever single leg long swing arm
  Lift operation Linak brand European electric actuator system
  Control Foot control
Electrical Requirements   Medically approved to AS 3200 / EN60601 - 1
  Supply 230vAC ±10%, 50hz max 1.5amp
  Operation 24vDC max 70VA
Lifting Capacity   300kg
Weight   95kg
Shipping Dimensions   170 x 80 x 65cm / 110kg.Shrink-wrapped on a wooden pallet with bubble wrap
ARTG No   123574
Warranty   5 years, parts only

 

 

Starting at: $7,546.00
Price includes GST

From the cart you can calculate freight and request a formal quote or place an order.

Options
Our standard vinyl upholstery is Studio brand medical grade heavy-duty vinyl fabric.
The exclusive formulation delivers a superior softness for comfort including excellent strength and wear characteristics.
Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils; light fast; fire retardant; sanitised; stain resistant.
Maintenance:
  • Recommended cleaning with chemically neutral soap and warm water, then wipe clean.
  • Do not dry-clean or use abrasive or solvent based products.
see product image
We can match your specific fabric on request. Depending on product there may be a surcharge
On request
Choose a width that suits your requirments
Suitable for most ABCO Health Care products subject to confirmation.
  • The batteries are mounted in a pack attached to the base framework and integrate with a special control box. This control box is not interchangeable with the standard control box which must be replaced for a field upgrade.
  • 1.2ah @24vDC.
  • Based on a typical load of 30% maximum actuator rating this permits approximately 35 up/down cycles when fully charged.
  • The actuator may be used with either mains or battery power.
  • Charge fully overnight before use, using mains cable to actuator system.
  • Frequent charging will extend the battery life which, subject to the usage pattern, will be up to 4 - 5 years. Infrequent charging may reduce this by as much as 60%.

  • Retractable wheels
    • Couch lifts on wheels for movement
    • On-the-floor stability in use
       
  • Braked Castors
    • More suitable for frequent movement or movement with a patient
    • Each castor is individually braked
       
If there are any options you would like that are not listed, please contact us. As the manufacturer we are able to do a variety of custom options including non-standard lengths and widths for an extra cost. Contact us via sales@abcohc.com.au or 03 9768 3756
If there are any options you would like that are not listed, please contact us. As the manufacturer we are able to do a variety of custom options including non-standard lengths and widths for an extra cost. Contact us via sales@abcohc.com.au or 03 9768 3756
Starting at: $7,546.00
Price includes GST

From the cart you can calculate freight and request a formal quote or place an order.

We have Finance options available
Related Products
  • Starting at: $6,006.00
    Price includes GST
  • Starting at: $5,126.00
    Price includes GST