Australian made height adjustable couches, tables and chairs for healthcare applications

ABCO P55 Podiatry Chair

The ABCO P55 Podiatry Chair is designed and manufactured in Australia with a 5 year warranty[*]


The fast electric motor quickly adjusts the height from an easily accessed 500mm up to 1750mm maximum heel height with 30° seat tilt making this chair suitable for taller practitioners who wish to stand while working
The P55 is designed for bigger patients and will lift up to 325kg
A 150mm leg extension allows for taller patients
Electric actuators control the seat tilt and the backrest angle with gas strut control of the leg rest

 

Product Code: PO50.06021.FEEG0F.00W10

Standard Specifications
ABCO Health Care has a policy of continuous improvement. Specifications and prices are subject to change without notice
Chair Dimensions Backrest section 840mm long
  Seat section 500mm long
  Leg section 370mm long including a 150mm extending section
  Overall length 1780 - 1930mm
  Width 600mm [ Arm rests. Total 760mm]
Upholstery Angle adjustment Seat Tilt & Backrest Electric
  Leg rest Gas strut support
Upholstery Fabric Vinyl – Medical grade heavy duty vinyl fabric. Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils. Light fast, fire retardant, sanitised and stain resistant.
  Foam 38mm high density foam covered by 12mm soft foam rolled over the edges of the strong plywood base providing a full working width and extended life with firm support.
  Colours Wedgewood. Other colours on request
Frame Materials Heavy steel plate and tube
  Colour Light Grey
  Wheel System Single action retractable castors for ease of movement and 'on-the-floor' stability in use. Levelling foot on one corner.
Height adjustment Range 500 - 1050 - 1750mm
  Lift mechanism Cantilever single leg long swing arm
  Lift operation Linak brand European electric actuator
  Control Foot control
Electrical Requirements   Medically approved to AS 3200 / EN60601 - 1
  Supply 230vAC ±10%, 50hz max 1.5amp
  Operation 24vDC max 70VA
Lifting Capacity   325kg
Weight   95kg
Shipping Dimensions   170 x 80 x 65cm / 110kg. Shrink-wrapped on a wooden pallet with bubble wrap
ARTG No   123754
Warranty   5 years, parts only

 

 

Select Custom Options

Options
Our standard vinyl upholstery is Studio brand medical grade heavy-duty vinyl fabric.
The exclusive formulation delivers a superior softness for comfort including excellent strength and wear characteristics.
Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils; light fast; fire retardant; sanitised; stain resistant.
Maintenance:
  • Recommended cleaning with chemically neutral soap and warm water, then wipe clean.
  • Do not dry-clean or use abrasive or solvent based products.
see product image
We can match your specific fabric on request. Depending on product there may be a surcharge
On request
Suitable for most ABCO Health Care products subject to confirmation.
  • The batteries are mounted in a pack attached to the base framework and integrate with a special control box. This control box is not interchangeable with the standard control box which must be replaced for a field upgrade.
  • 1.2ah @24vDC.
  • Based on a typical load of 30% maximum actuator rating this permits approximately 35 up/down cycles when fully charged.
  • The actuator may be used with either mains or battery power.
  • Charge fully overnight before use, using mains cable to actuator system.
  • Frequent charging will extend the battery life which, subject to the usage pattern, will be up to 4 - 5 years. Infrequent charging may reduce this by as much as 60%.

Choose a width that suits your requirments
All our Breathe Holes come with an upholstered plug insert
Starting at: $5,245.00+GST

From the cart you can request a formal quote or place an order.

Related Products
  • Starting at: $5,784.00+GST
  • Starting at: $3,675.00+GST
  • Starting at: $6,600.00+GST